Wheel Spacers - 5X100 57.1CB - 5mm

Price: $29.95
Free Shipping
Product Code: 500157105B
Availability: In Stock
  • Quantity: 1 Pair (2 Pieces)
  • Bolt Pattern: 5x100
  • Thread Size: 12x 1.5
  • Width: 5mm
  • Bore Size: 57.1mm
  • CustoMadeOnly wheel spacers/ adapters designed to space the wheels outward from the hub effectively widening the stance of the vehicle and improve the balance of the vehicle. These spacers also can be used to get the clearance needed when installing the big brake kit or wheels with improper offset. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the bolder styling that you've been looking for. Computerize CNC machined from solid piece of high grade aluminum ensures precise fitment and exceptional strength. Build-in wheel studs (If Applicable) for simple and trouble-free installation. Special design tapered lug nuts are provided to make sure the spacers are properly secured and aligned.

    How to choose the right spacer (how to measure the correct width and clearance)

    hr-wheel-spacers-2.jpg

     

    What Size Should I Use?

     

    Welcome to the black magic of wheel spacers!  This is one of our most commonly asked questions. Unfortunately, it has no easy answer.  If it were easy, we'd all be using the same size!  

     

    Tailored to your needs, selecting your ideal size is easy by first determining how much available space you have to work with by measuring your tire-fender clearance.  This empty space will likely be your spacer size.  Naturally, let’s not exceed the empty space as that will lead to the tire rubbing on the fender.  Likewise we don’t want to go too thin of a spacer as they may not meet your needs.  It’s a Goldilocks story of not too much, not too little, and finding the perfect match right in the middle.  

     

    Here are some easy ways to measure your wheel gap -

     

    Old-School Tape Measure Trick

     

    With the car on level ground, hang a piece of masking tape from your fender.  Stick a quarter (or a bolt or nut, something with a bit of weight) on the end so that it hangs straight down (gravity is your friend!)  Next, measure in from the masking tape to the outermost edge of your tire.  This will tell you how much space you have until the tire would contact the lip of the fender.  Pick a spacer that is slightly LESS than this measurement.  This will ensure the tire does not rub on the fender lip.

     

    Even More Old-School Straight-Edge Trick (no moving parts!)

     

    Same as the method above but if you don't have masking tape to hang from the fender, you can use a straight-edge or ruler, and a secondary ruler or tape measure.  Holding the first straight-edge from the bottom of the fender lip, perpendicular to the ground, use the second ruler or tape measure to find measurement to the outermost edge of the tire.  The gap between the first straight-edge and the tire is your available clearance.  Choose a spacer size slightly LESS than this dimension.

    Write a review

    Your Name:
    Your Review:
    Note: HTML is not translated!

    Rating: Bad            Good

    Enter the code in the box below:



    Years Make Model Special Note
    1992-1997 Oldsmobile Achieva
    1987-1996 Chevrolet Beretta
    1982-2005 Chevrolet Cavalier
    1982-1989 Chevrolet Celebrity
    1980-1989 Buick Century
    1995-1997 Chrysler Cirrus
    1980-1983 Chevrolet Citation
    1987-1996 Chevrolet Corsica
    1985-1993 Dodge Daytona
    1988-1993 Dodge Dynasty
    1984-1988 Pontiac Fiero
    1985-1998 Pontiac Grand Am
    1985-1995 Chrysler LeBaron
    1995-2005 Dodge Neon
    1985-1993 Chrysler New Yorker
    2001-2012 Chrysler PT Cruiser
    1996-2007 Chrysler Sebring
    1982-1989 Buick Skyhawk
    1981-1998 Buick Skylark
    1986-1987 Buick Somerset
    1989-1995 Dodge Spirit
    1995-2006 Dodge Stratus
    1986-1989 Pontiac Sunbird
    1995-2004 Pontiac Sunfire
    © 2018 customadeonly.com All Rights Reserved Worldwide. RSS